[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
linux 2.6.0-test5-mm3 bug report
Dear Linux-Kernel MM Maintainers,
attached is my bug report of the 2.6.0-test5-mm3 kernel, and the fact
that I am unable to burn cd's at all. hopefully this can aid in the
development of 2.6.x and find a reason why i cant burn cd's!
cheers,
jeffrey forman
cdrecord in 2.6.0-test5-mm3 bug
jeffrey forman : <jforman@mail.utexas.edu>
[1.] One line summary of the problem: I have been unable to burn cds and cdrws with the 2.6.0-test# line of kernels.
[2.] Full description of the problem/report: I am fully able to blank cdrw's in 2.6.0, but have not been able to burn cd's at all using atapi burning and the scsi emulation.
[3.] Keywords (i.e., modules, networking, kernel): cdrecord, cdrw, burner, cdr, mm kernel.
[4.] Kernel version (from /proc/version): Linux version 2.6.0-test5-mm3 (root@tribeca.formanonline.com) (gcc version 3.2.3 20030422 (Gentoo Linux 1.4 3.2.3-r1, propolice)) #3 Sun Sep 21 17:04:48 CDT 2003
[5.] Output of Oops.. message (if applicable) with symbolic information
resolved (see Documentation/oops-tracing.txt)
[6.] A small shell script or example program which triggers the
problem (if possible): cdrecord dev=0,0,0 <File> and cdrecord dev=ATAPI:/dev/hdc <file>
[7.] Environment
[7.1.] Software (add the output of the ver_linux script here)
jforman@tribeca linux $ sh scripts/ver_linux
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux tribeca.formanonline.com 2.6.0-test5-mm3 #3 Sun Sep 21 17:04:48 CDT 2003 i686 Intel(R) Pentium(R) 4 CPU 2.80GHz GenuineIntel GNU/Linux
Gnu C 3.2.3
Gnu make 3.80
util-linux 2.11z
mount 2.11z
e2fsprogs 1.33
nfs-utils 1.0.5
Linux C Library 2.3.1
Dynamic linker (ldd) 2.3.1
Procps 3.1.9
Net-tools 1.60
Kbd 1.06
Sh-utils 5.0
Modules Loaded sr_mod nvidia sg parport_pc lp parport snd_seq_midi snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_emul snd_emu10k1 snd_rawmidi snd_ac97_codec snd_util_mem snd_hwdep snd_pcm_oss snd_pcm snd_page_alloc vfat fat ipv6 uhci_hcd ohci_hcd ehci_hcd tuner tvaudio msp3400 bttv video_buf i2c_algo_bit btcx_risc i2c_core v4l2_common videodev
[7.2.] Processor information (from /proc/cpuinfo):
jforman@tribeca jforman $ cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 15
model : 2
model name : Intel(R) Pentium(R) 4 CPU 2.80GHz
stepping : 7
cpu MHz : 2800.547
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid
bogomips : 5537.79
[7.3.] Module information (from /proc/modules):
jforman@tribeca jforman $ cat /proc/modules
sr_mod 14112 0 - Live 0xe1ab4000
nvidia 1702252 10 - Live 0xe1be6000
sg 29708 0 - Live 0xe1a04000
parport_pc 23816 1 - Live 0xe1a0d000
lp 9056 0 - Live 0xe19ee000
parport 36160 2 parport_pc,lp, Live 0xe19fa000
snd_seq_midi 6816 0 - Live 0xe19eb000
snd_emu10k1_synth 6912 0 - Live 0xe18ec000
snd_emux_synth 34432 1 snd_emu10k1_synth, Live 0xe1955000
snd_seq_virmidi 5888 1 snd_emux_synth, Live 0xe18ef000
snd_seq_midi_emul 7040 1 snd_emux_synth, Live 0xe18a5000
snd_emu10k1 89220 3 snd_emu10k1_synth, Live 0xe195f000
snd_rawmidi 20480 4 snd_seq_midi,snd_seq_virmidi,snd_emu10k1, Live 0xe18bf000
snd_ac97_codec 50820 1 snd_emu10k1, Live 0xe18d0000
snd_util_mem 3712 2 snd_emux_synth,snd_emu10k1, Live 0xe18a8000
snd_hwdep 7296 1 snd_emu10k1, Live 0xe18bc000
snd_pcm_oss 47236 0 - Live 0xe18df000
snd_pcm 86400 2 snd_emu10k1,snd_pcm_oss, Live 0xe192d000
snd_page_alloc 9348 2 snd_emu10k1,snd_pcm, Live 0xe18b8000
vfat 12544 1 - Live 0xe18aa000
fat 40864 1 vfat, Live 0xe18c5000
ipv6 216160 10 - Live 0xe18f7000
uhci_hcd 29704 0 - Live 0xe18af000
ohci_hcd 16384 0 - Live 0xe18a0000
ehci_hcd 21760 0 - Live 0xe1899000
tuner 14340 0 - Live 0xe1870000
tvaudio 20608 0 - Live 0xe1869000
msp3400 22544 0 - Live 0xe1862000
bttv 135584 2 - Live 0xe1876000
video_buf 17152 1 bttv, Live 0xe184b000
i2c_algo_bit 9480 1 bttv, Live 0xe1840000
btcx_risc 3972 1 bttv, Live 0xe1849000
i2c_core 21252 5 tuner,tvaudio,msp3400,bttv,i2c_algo_bit, Live 0xe1851000
v4l2_common 3968 1 bttv, Live 0xe1847000
videodev 7808 3 bttv, Live 0xe1844000
[7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
jforman@tribeca jforman $ cat /proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-005f : timer
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial
0376-0376 : ide1
0378-037a : parport0
037b-037f : parport0
03c0-03df : vesafb
03f6-03f6 : ide0
03f8-03ff : serial
0cf8-0cff : PCI conf1
8800-887f : 0000:00:0d.0
8800-887f : 0000:00:0d.0
9000-9007 : 0000:00:0a.1
9400-941f : 0000:00:0a.0
9400-941f : EMU10K1
b400-b40f : 0000:00:02.5
b400-b407 : ide0
b408-b40f : ide1
e600-e61f : 0000:00:02.1
jforman@tribeca jforman $ cat /proc/iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-1fffbfff : System RAM
00100000-0032765b : Kernel code
0032765c-00412bff : Kernel data
1fffc000-1fffefff : ACPI Tables
1ffff000-1fffffff : ACPI Non-volatile Storage
e3800000-e380007f : 0000:00:0d.0
e4800000-e4800fff : 0000:00:03.3
e4800000-e4800fff : ehci_hcd
e5000000-e5000fff : 0000:00:03.2
e5000000-e5000fff : ohci-hcd
e5800000-e5800fff : 0000:00:03.1
e5800000-e5800fff : ohci-hcd
e6000000-e6000fff : 0000:00:03.0
e6000000-e6000fff : ohci-hcd
e6800000-e6800fff : 0000:00:02.3
e7000000-e7ffffff : PCI Bus #01
e7000000-e7ffffff : 0000:01:00.0
e8000000-ebffffff : 0000:00:00.0
ee800000-ee800fff : 0000:00:0b.1
ef000000-ef000fff : 0000:00:0b.0
ef000000-ef000fff : bttv0
eff00000-febfffff : PCI Bus #01
f0000000-f7ffffff : 0000:01:00.0
f0000000-f0ffffff : vesafb
fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
ffff0000-ffffffff : reserved
[7.5.] PCI information ('lspci -vvv' as root)
tribeca root # lspci -vvv
00:00.0 Host bridge: Silicon Integrated Systems [SiS] SiS 645xx (rev 02)
Subsystem: Asustek Computer, Inc.: Unknown device 8086
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 32
Region 0: Memory at e8000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [c0] AGP version 3.0
Status: RQ=32 Iso- ArqSz=2 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3+ Rate=x4
Command: RQ=1 ArqSz=0 Cal=3 SBA- AGP+ GART64- 64bit- FW- Rate=x4
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS 530 Virtual PCI-to-PCI bridge (AGP) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000dfff
Memory behind bridge: e7000000-e7ffffff
Prefetchable memory behind bridge: eff00000-febfffff
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
00:02.0 ISA bridge: Silicon Integrated Systems [SiS]: Unknown device 0963 (rev 04)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:02.1 SMBus: Silicon Integrated Systems [SiS]: Unknown device 0016
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 10
Region 4: I/O ports at e600 [size=32]
00:02.3 FireWire (IEEE 1394): Silicon Integrated Systems [SiS] FireWire Controller (prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 809a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1000ns min, 3000ns max)
Interrupt: pin B routed to IRQ 10
Region 0: Memory at e6800000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at efee0000 [disabled] [size=128K]
Capabilities: [64] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=55mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (prog-if 80 [Master])
Subsystem: Asustek Computer, Inc.: Unknown device 8087
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 128
Interrupt: pin ? routed to IRQ 11
Region 4: I/O ports at b400 [size=16]
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8087
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+
Latency: 32 (20000ns max), cache line size 08
Interrupt: pin A routed to IRQ 5
Region 0: Memory at e6000000 (32-bit, non-prefetchable) [size=4K]
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8087
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+
Latency: 32 (20000ns max), cache line size 08
Interrupt: pin B routed to IRQ 11
Region 0: Memory at e5800000 (32-bit, non-prefetchable) [size=4K]
00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8087
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+
Latency: 32 (20000ns max), cache line size 08
Interrupt: pin C routed to IRQ 10
Region 0: Memory at e5000000 (32-bit, non-prefetchable) [size=4K]
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20 [EHCI])
Subsystem: Asustek Computer, Inc.: Unknown device 8087
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (20000ns max)
Interrupt: pin D routed to IRQ 5
Region 0: Memory at e4800000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 07)
Subsystem: Creative Labs SBLive! Player 5.1
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at 9400 [size=32]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 07)
Subsystem: Creative Labs Gameport Joystick
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Region 0: I/O ports at 9000 [size=8]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 02)
Subsystem: Hauppauge computer works Inc. WinTV Series
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (4000ns min, 10000ns max)
00:0b.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 02)
Subsystem: Hauppauge computer works Inc. WinTV Series
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (1000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ee800000 (32-bit, prefetchable) [size=4K]
00:0d.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)
Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (2500ns min, 2500ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 8800 [size=128]
Region 1: Memory at e3800000 (32-bit, non-prefetchable) [size=128]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: nVidia Corporation NV28 [GeForce4 Ti 4200 AGP 8x] (rev a1) (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e7000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at effe0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 3.0
Status: RQ=32 Iso- ArqSz=0 Cal=3 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
Command: RQ=32 ArqSz=2 Cal=0 SBA- AGP+ GART64- 64bit- FW- Rate=x4
[7.6.] SCSI information (from /proc/scsi/scsi)
tribeca root # cat /proc/scsi/scsi
Attached devices:
[7.7.] Other information that might be relevant to the problem
(please look in /proc and include all information that you
think to be relevant):
tribeca root # cdrecord -version
Cdrecord-Clone 2.01a18 (i686-pc-linux-gnu) Copyright (C) 1995-2003 Jörg Schilling
[X.] Other notes, patches, fixes, workarounds: